Not sure which line you have? Start with the identification reference. Part numbers below are the OEM's own, from the renewal parts publications cited under each table. Where a number ends in -xx, the suffix is selected from a table in the cited document by breaker type, NEMA size, or hand.
Eaton F2100 and Advantage: handle mechanism kits by disconnect
Scroll table left / right →Source: Eaton RP04304001E (F2100), December 2002. RP04304002E (Advantage) lists the identical handle table. Each kit includes operating arm, adjustable linkage, and hardware.| Disconnect in the bucket | Handle mechanism kit |
|---|
| FB breaker or MCP | 4719A92G43 |
| KB breaker | 4719A92G05 |
| HFD breaker or HMCP | 4719A88G01 |
| HFD / HMCP, 6 inch unit | 4719A92G56 |
| HMCPE | 4700A99G69 |
| HLD | 4700A99G65 |
| HJD or HKD | 4719A89G01 |
| LB | 4719A92G06 |
| MA or MC | 4719A92G07 |
| NB | 4719A92G08 |
| FCL | 4719A92G44 |
| LCL | 4719A92G45 |
| K fusible switch, 30/60/100 A | 5A10098G01 |
| K fusible switch, 200 A | 5A10098G03 |
| K fusible switch, 400 A | 5A10098G05 |
Eaton F2100: structure and unit parts
Scroll table left / right →Source: Eaton RP04304001E. Stab assemblies are not sold separately on any Eaton vintage: a replacement unit includes new wrapper, stab assembly, door, and handle mechanism (RP04304001E p. 26).| Part | Number |
|---|
| Vertical bus, 300 to 1200 A | 4719A80G01 - G05 |
| Vertical bus shutter kit | 4719A91G15 |
| Blank unit doors, 6" to 36" | 4719A91G20 - G25 |
| Door mounting hardware kit (2 hinges, pins, two quarter-turn latches) | 4719A91G26 |
| Vertical wireway door kit | 4719A91G17 |
| Unit drawout top rail | 4719A92G02 |
| Pull-apart terminal block, 7 circuit | 4719A92G57 |
| Overload reset button and rod kit | 4719A92G58 |
| Control transformers, 50 to 500 VA | 4719A92G46 - G54 |
| Bus splice kits | 4719A97G86 - G91 |
| Touch-up paint | 4719A91G10 |
Eaton / Cutler-Hammer Freedom Unitrol: handle mechanisms
Scroll table left / right →Source: Eaton RP04304004E (Freedom Unitrol, 1988-94). Dual-handle variants: 82-6439, 82-6440, 82-6442, 82-6443 per the same tables.| Disconnect | Handle mechanism |
|---|
| FS / FH breaker, single | 82-5821 |
| FD / HFD / FDC / HMCP, single | 82-6441 |
| 6 inch unit | 82-6437 |
| JS / JH / JL | 82-6438 |
| JD / HJD | 82-6444 |
| KS / KH / KD / HKD | 82-6445 |
| LS / LH / LC | 82-5824 |
| MS / MH / MC | 82-5827 |
| NS / NH / NC | 82-5828 |
| Fusible 30 / 60 A, single | 82-5829 |
| Fusible 100 A | 82-5830 |
| Fusible 200 A | 82-5831 |
| Fusible 400 A | 82-6458 |
| Fusible 600 A | 82-6562 |
| Fusible 800 A | 82-6566 |
Westinghouse Type W: handle mechanisms and unit parts
Scroll table left / right →Source: Eaton RP04304006E (Type W, 1965-75). The same document lists Series C retrofit kits converting Type W, Five Star, and F10 buckets from obsolete MCP / F / FA / FB / K / KA / KB / L / LA / LB breakers to Series C, the only OEM-documented cross-generation breaker retrofit in this group.| Part | Number |
|---|
| Handle: HMCP / HFD / MCP / FB | 4719A94G03 |
| Handle: HJD / KB / MCP 250 | 4719A94G04 |
| Handle: LA / MCP 400 | 4719A94G05 |
| Handle: MA | 4719A94G06 |
| Handle: NB | 4719A94G07 |
| Handle: DS switch 30/60/100 A | 4719A94G08 |
| Handle: DS switch 200 A | 4719A94G09 |
| Pressure terminal block | 4719A94G11 |
| Pull-apart terminal block | 4719A94G12 |
| Unit top rail | 4719A94G32 |
| Single to dual feeder breaker kit | 4719A94G18 |
| Fuse clip kits | 4719A94G22 - G30 |
GE 8000-Line and Spectra
Scroll table left / right →Source: ABB/GE renewal parts bulletin GEF-4628B (June 2026 edition). Gx suffixes select by unit function, NEMA size, and door height per the bulletin's matrices. Two hard stops in the same document: Spectra handle assemblies are obsolete (broken assembly means an 8000-style replacement bucket), and QMR/QMW fusible switches are no longer supported.| Part | Number |
|---|
| Handle only (egg-shaped operator) | 204B4050RWG6 |
| Handle only, earlier style | 204B4050RWG5 |
| Handle assembly, TED/TEC breaker combos | 169C6350KEGx |
| Handle assembly, fusible 30-600 A | 169C6350KHGx / KGGx |
| Handle assembly, TFJ/TFK and TJJ/TJK frames | 169C6381AAGx - ASGx |
| Stab base assembly (plastic base and cover) | 117B6219G1 |
| Stab power harness, by size and door height | 8000L4Gx / L6Gx / L8Gx |
| Vertical ground bus stab finger | 259A3264G1 |
| Door latch assembly, quarter-turn | 169C6366DMG2 |
| Unit frame latch assembly | 169C6386DMG1 |
| Racking screw, plug-in units | 273A7722P1 |
| Overload reset assemblies | 204B4142BDG1 - G7 |
| Control terminal board assembly, 3 point | 204B4048G1 |
Allen-Bradley CENTERLINE 2100
Scroll table left / right →Source: Rockwell publication 2100-6.0.2, CENTERLINE MCC Renewal Parts Selection Guide (hosted as 2100-TD015-EN-P), the deepest component-level parts book in the industry: 114 pages including exploded views and a serial/series decoder. The -xx suffixes select by bulletin number, NEMA size, amps, and hand from its tables; stab selection is on pp. 73-74.| Part | Number |
|---|
| Handle + operating mechanism + side plate | 40116-438-xx |
| Handle + operating mechanism | 40116-440-xx |
| Handle + breaker operating mechanism | 40116-446-xx |
| Large-frame handles | 40126-416-xx / 417-xx / 832-xx |
| Unit stab assembly (ships with NO-OX-ID) | 40120-410-xx |
| Stab mounting screws, 1/4-20 taptite | 28171-140-09 |
| Handle legend caps (ON/OFF/RESET/TRIPPED) | 40116-117-01 - 08 |
| Handle gaskets | 40119-264-01 / -02 |
| Control terminal block, 5 pole (= 1492-EC85, 25 A) | 40164-426-xx |
| Power terminal block, 3 pole (= 1492-ED103, 60 A) | 40164-427-03 |
| Size 3 power terminal blocks (= 1492-CE2, 195 A) | 40120-818-01 - 03 |
| Ground lug, #4 to 500 MCM | 40114-812-01 |
| Ground lug, #6 to 250 MCM | 40114-812-02 |
| NO-OX-ID stab grease, pint / 1 oz | 2100-N18 / 2100-N18T |
Siemens: tiastar and legacy lines
Scroll table left / right →Source: Siemens Aftermarket Renewal Parts Catalog, ANSI-LV-MCC-AFTMKT. Handle kit suffixes select by breaker type (through current 3VA retrofits) and hand per its tables. The shutter kit fits only insulated-vertical-bus structures built after June 1, 2001. Stab and unit-side bus parts are factory service quote only.| Part | Number |
|---|
| Handle kits, Model 95 | 8PG1092-1HC00 - 14 |
| Handle kits, Model 95+ | 8PG1092-1HD00 - 15 |
| Handle kits, Model 90 | 8PG1092-1HB00 - 06 |
| Handle kits, Marq21 | 8PG1092-1HA00 - 13 |
| Handle kits, System 89 / tiastar | 8PG1192-1HE00 - 33 |
| Vertical wireway doors, 95+/89/tiastar | 8PG1192-1DD00 - 24 |
| Unit and filler doors | 8PG1192-1DE00 - 51 |
| tiastar door latch and mounting kit | 8PG1192-2DF01 |
| Plug-in unit support kits | 8PG1192-2DF02 / -2DF03 |
| Overload reset kits | 8PG1192-2RA00 / -2RA01 / -2RB00 |
| Horizontal bus splice kits, 600-2500 A | 8PG1191-2KA / -2KB |
| tiastar shutter mechanism kit | 8PG1191-2MA00 |
| Touch-up paint | XPT060M |
Square D Model 6
Scroll table left / right →Schneider publishes no consolidated Model 6 parts bulletin; these numbers come from se.com FAQ articles and orderable Class 8998 accessory SKUs. Model 5 handles, linkages, and saddle assemblies are obsolete (FAQs FA127402, FAQ000269132). Model 4: replacement units by 8998 catalog type and Model 6 transition sections only, per the Obsolete MCC digest, section 12.| Part | Number | Schneider source |
|---|
| Handle mechanism, Size 1, 12" unit, PowerPact H MCP/TM | 80439-402-51 | FAQ FA313959 |
| Operator mechanism with handle | 80439-889-54 | FAQ FA400650 |
| Stab assembly, 100 A H-frame breaker feeder | 80451-941-55 | FAQ FA127804 |
| Pawl latch assembly (units over 12" only) | 80420-879-50 | FAQ knowledge base |
| Breaker feeder doors, 6" / 12" / 18" | 80427-002-51 / 80440-007-53 / 80440-012-55 | FAQ knowledge base |
| Mid shelf, current standard | 80466-008-52 | FAQ FA128794 |
| Blank doors by height, 6" to 24" | 8998CP06 - 8998CP24 | Class 8998 catalog SKUs |
| Wireway cover screws, 10-32 x 1.25 | 80450-227-01 | FAQ FA129593 |
Sources
1. Eaton renewal parts guides RP04304001E (F2100), RP04304002E (Advantage), RP04304003E (Series 2100 / Five Star), RP04304004E (Freedom Unitrol), RP04304005E (F10), RP04304006E (Type W), RP04304007E (9800 Unitrol), RP04304008E (11-300), RP04304010E (Type 5600), all December 2002.
2. ABB/GE, renewal parts bulletin GEF-4628B, June 2026; GEH-4961.
3. Rockwell Automation, publication 2100-6.0.2 / 2100-TD015-EN-P.
4. Siemens, Aftermarket Renewal Parts Catalog ANSI-LV-MCC-AFTMKT; identification guide CCBR-MCCAR-0813.
5. Schneider Electric, catalog 8998CT9701; se.com FAQ articles as cited per row; Obsolete Motor Control Centers digest, section 12.
Related: identify your lineup, breaker interrupting ratings, parts in stock.
